View Full Version : Parting Out 1966 337A
bonanza
04-19-13, 03:24 PM
Hi everyone,
Parting out a 1966 337A model. Engines have already been removed and sold. Has a full avionics stack. I'll be keeping some parts to use on my 337C.
Let me know what you need!
GMPoland
04-21-13, 09:17 PM
Any chance you still have a rear spinner? GMPoland@graeba.net
bonanza
04-22-13, 12:21 PM
Yes, PM me your phone number to discuss
I could use 3 of the 4 hole inspection hole covers if you have them.
Thank you,
Bill King
please describe Full radio stack with desired prices for each. Thanks. Auto pilot? price
Thanks Rick b
cessnadriver
02-04-14, 09:29 PM
Hello.
Are you still parting out your 1966 c337? I'm looking for an out board (co-pitol side) seat rail? If you have, how much?
Thanks, BILLS bstory@pa.rr.com 814-673-6863
I could use both, or one if available, of the fuel sump tanks in the booms. Thanks Rick b 970-532-5288
Frank Benvin
02-13-14, 09:44 AM
I could use both, or one if available, of the fuel sump tanks in the booms. Thanks Rick b 970-532-5288
http://www.acornwelding.com/pdf/Cessna/Cessna%20Twins/Cessna%20337%20.pdf
BenTankard
02-18-14, 07:32 PM
Anybody got a lead on a Master Switch (Part # S1790-1-1) for my 1968 non-turbo Skymaster?
bentankard@aol.com
hharney
02-18-14, 09:43 PM
Ben
Is that a 3 section toggle switch? Those might be really hard to come by. Have you checked with Don Nieser at Commodore Aero?
Original part #S1790-1 replaced by S1790-1-1
http://www.cessnadirect.com/s1790-1.html
Yingling indicates it is out of stock. I checked a few other sources and don't come up with anything. Call Don.......
Hi looking for fuel r/m fuel gauge for my 337a 66 model. Cherrd
georgesander
02-07-15, 10:14 PM
I need a serviceable or repairable aux fuel sensor/float.
Hi everyone,
Parting out a 1966 337A model. Engines have already been removed and sold. Has a full avionics stack. I'll be keeping some parts to use on my 337C.
Let me know what you need!
Hi looking for right main fuel gauge or complet cluster.
cessnadriver
05-31-15, 06:31 PM
TO GEORGE SANDERS-
George, check e-bay, I purchased two of the Aux. fuel tank sending units, NOS, GOOD Cessna part number, $50 each.
FYI.
BILLS
cessnadriver
05-31-15, 06:36 PM
Rmp "Hi looking for fuel r/m fuel gauge for my 337a 66 model. Cherrd"
Do you have the part number? I have a couple of extras.
BILLS
ERoberts
09-16-15, 10:44 AM
Do you have the 3rd and 4th seat and rails
Eric Roberts
615-642-4466
cachilds1
09-29-15, 08:02 PM
Do you still have the RPM gage? I'm looking for one.
Christian
4108088984
I AM IN NEED OF A RAER COWL FLAP CABLE # S1244-17, IF YOU CAN HELP PLEASE SEND ME AN EMAIL nicknazari@gmail.com
Kevin McMahan
09-02-16, 08:30 AM
Hello Do you have a rear cowl flap motor to sell ? Thanks Kevin
Tim Wang
02-14-20, 02:55 AM
I own a 1967 337B model looking for the left main fuel gauge part#441334 plus the ammeter selector switch part#50002-3. If you have any of these parts let me know.
Thanks for your attention but now have parts thanks to Don Nieser of Commodore Aerospace.
Tim
i need download accumulater for early model 337
vBulletin® v3.6.9, Copyright ©2000-2024, Jelsoft Enterprises Ltd.