Parting out P337-0022 N3CY
 

I purchased our relic P337 that has sat outside our private airport 3OH0 for approximately 30 years. I am keeping the windshield deice plate and some others parts for my 74 model. About 2800 hrs deice system, O2 system, etc, engines appx. 1200 hours 1978 factory remans.

Let me know what you might need.

Dan Schultz
Tipp City, Ohio
937-603-2459
Schultzav@woh.rr.com

What's the interior color? Is any of it still useable?
Welcome to the used airplane parts biz! :D

PS - I've seen this plane before online. Here's a pic:

Attachment 2520

Sent an email and left a voicemail, but I haven't heard back from you. Check your PMs as well please.

Sorry,

Interior is red, front seats are spoken for, and the fifth seat, middle seat is in pretty good shape. Side panels will clean pretty well.

Dan
937-603-2459

I could use the rear air scoop (the big top one) - that whole piece.

-Bjorn

I’m looking for engine probes if there is a monitoring system in there.

No monitoring system.

Alanw,

What probes are you looking for? I have 2 factory CHT probes I just removed from my engines.

I think I have the factory ones. I believe I need the needle ones and right now 12 CHT and 12 EGT probes.

Prop syncro
 

Hi Dan
Does it have the prop cyncro boxes
Regards
Jesper

The boxes I have are Synchrophaser SP100A pn 42150 0000
and sp105B pn 43380 0001

Jesper

yes it does, both governors, brain box, box for the rear prop adjustment, one prop unfeathering accumulator, rear accumulator is missing.

Dan

If Dan doesn’t work out for you, I just removed them from my 337G. Main sync box and rear actuator as well as at least one of the sensors. No governors (they were not repairable).

MLG Doors
 

I'll take the main landing gear doors if they are not too bad. Could you post some pictures?

Email sent

door seal available
 

is the door seal still good? I could use one if it's available.

I have removed it and it appears to not have any holes in it

Dan

Do you have a battery box cover?

No battery box cover

I recently converted to a sealed battery and tray-only set-up, since the full box was getting hard to find.

Dan
I’m looking for inner rubber window trim. The copilots side window ( upper door ) and door panel is broken. I have sourced a door panel and painted it. However, I have not been able to find the rubber trim that goes around the inner windows.

If you have some that is in reasonably good shape, I would be interested. The inner plastic window as well.

If it’s been outside for 30 years however, I’m assuming it’s probably not in good shape.
Thought I would check.

Thx

Greg. 605-376-1829
P337H

Greg,

Here is a possible source for interior window trim weatherstripping.

https://www.brownaircraft.com/BA-217.../ba-2171-1.htm

Thanks.
I’ll try that source.

Greg

Greg

Sorry those parts are not good from 3CY.

Dan

The contact you gave me had the rubber seal. I really appreciate the tip!

Greg

For those looking for interior window trim, I ordered mine from Yingling Aviation just over two weeks ago and its in the mail to me as we speak. They did not have any in stock when I called originally, but they were quick to turn it around to me with and AOG request to Cessna. Just need a tail number to include with the request. I highly recommend Yingling, I've been doing business with them for years and they have a great relationship with Cessna.