Many parts for sale
 

We have sold our last 4 Skymaster and have many parts for sale most of which were for T337H models but will fit others. I have a windshield, wing tips, fin tips nav light lenses, prop governors, turbochargers (not for a P). I have all the components to rebuild the alternator out circuit board. I have new ignition harnesses. I still have the core engine with 1551 hrs since factory rebuild, I have a rear engine mount, a rebuilt cowl flap motor.
I have too much to list so message me and I’ll see if I have it
Kim

Radome for P337H
 

Any idea where I can find a wing Radome for a 337?, Dan

This guy makes them, and very high quality from all reviews: https://www.facebook.com/groups/3601...00009984700003

Reach him via Facebook. He lives in Kiev.

Don't suppose you have the aft seat for a 75 G model

I actually have 7 rear seats for turbo H’s
I’ll look in the parts book to see if the are the same

I'd be interested too Kim. When I bought my P337H it had no rear seat. I'm referring to the 5th seat in the third row.

What I have might not work the turbo H models had 2 seat in the very back

You're right Kim. The the P models have two big valves in the middle of the rear firewall for pressurization purposes. The "P" 5th seat is narrower on the back than the bottom in order to accommodate these valves.

Did you find out if the seats would work for my 75 G model? If so, I'd be interested in getting one. Please let me know.

Thanks,

Tripp

My seats will fit s/n 33701816 and on I think earlier than that the seats bolted to the floor. The seats I have to go on rails
P/N ‘s 1514131-1 and -2

Bummer, my ship is 1670. I need the bolt to the floor model

By any chance would you have a certifiable altimeter compatible with a 69D?

I do not. I have 4 of the encoding altimeters but I think they were bad and we replaced them with standard altimeters and encoders

Front gear micro switch
 

Do you happen to have the microswitch for the front landing gear?

I'm looking for one.

Thanks,

Tripp

I do. I have both, the one on the actuator (square metal one) and the one on the uplock hook

Need a gear micro switch
 

Kim. The micro switch I need is part number USM5W. It attaches to the throttle linkage and cam on top of the engine. Do you have that? 1 or 2? How much to ship it overnight?

Thanks,

Tripp Page
936-494-5596

Sorry so long to respond. I’ve been out of town I think I have those and will make sure Wednesday and let you know

Hello
I am looking for :
1 x rear prop
1 x front prop
for a FTB337G - 1975 - F-HCRF
Thanks
Alain

Good afternoon
I need the interior door panel that is around the two windows.
Any checks you have that plastic piece?
Thx
Greg
Gfalvine@gmail.com
605-376-1829

I do not have that piece, sorry

Would you happen to have a CDI approved for GPS?

Seats
 

Do you still have any of the back seats? Color?

I do not have any seats left sorry

Nose gear door for 69 337D
 

Do you have a co-pilots side nose-gear door with the hinges, or the front hinge for the co-pilots side nose gear door?

I think I do have one. I’ll look this afternoon and get back to you
Kim

Middle bench seat belts and hardware?
 

Looking for a set of middle bench seat belts and one of the metal mounting clips that attaches the outboard belt to the airframe. P/N 1414205-4 (MX Manual FIG 61 - 81).