Skymaster Forum

Skymaster Forum (http://www.337skymaster.com/messages/index.php)
-   Messages (http://www.337skymaster.com/messages/forumdisplay.php?f=1)
-   -   Someone confirm Taxi and Landing light spec? (http://www.337skymaster.com/messages/showthread.php?t=5488)

YankeeClipper 02-16-24 01:55 PM

Someone confirm Taxi and Landing light spec?
 
A 2010 thread started, but failed to resolve this question. Best I can tell, PAR 36 for Taxi and Par 46 for Landing? No, I take that back ... I can't tell at all.

Mich3773 02-18-24 09:47 AM

1 Attachment(s)
I think they are both Par 36, but the support assembly points the taxi light down lower than the landing light.

Rick Erwin 02-22-24 08:28 PM

If you are replacing them with LED bulbs, there are different bulbs for the taxi and the landing lights.

Rick

YankeeClipper 02-23-24 02:33 AM

Do you know which type the other would be? If go look but it's in a shop 2 hours away, and the IA is badly overbooked and understaffed so I don't want to bother him with this.

And yes, I am looking to go LED.

Rick Erwin 02-23-24 09:51 AM

The PARMETHEUS™ G3 PAR 36 LED LANDING & TAXI LIGHTS are probably what you're looking for. These are STC'd so there shouldn't be a problem with your IA approving them. The STC documents are available via a tab on this page (see item #66 and #74 on the STC/AML). There might be other brands of TSO'd lights out there also ... ?

Rick

YankeeClipper 02-23-24 10:31 AM

Thanks. When I went to various resellers and punched in the application (69 Delta) some of them would offer up a PAR 46, where others would state as you just did. Since they are clearly not interchangeable, it was a bit of a head-scratcher.

Appreciate you clearing that up.

Learjetter 02-23-24 01:52 PM

AeroLED landing and taxi lights
 
AeroLEDs Sunspot 36 series is also PMA’d for our 337s. See PMA supplement 7 on their site.

https://aeroleds.com/faa-documentation/


All times are GMT -4. The time now is 05:15 PM.

Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.