Skymaster Forum

Skymaster Forum (http://www.337skymaster.com/messages/index.php)
-   Messages (http://www.337skymaster.com/messages/forumdisplay.php?f=1)
-   -   Trim piece location for a G or H pressurized model? (http://www.337skymaster.com/messages/showthread.php?t=4754)

Rick Erwin 08-17-20 12:49 PM

Trim piece location for a G or H pressurized model?
 
Attached are a couple pictures of the broken trim piece next to an unbroken trim piece of the same type. Only the top 1/2" would be visible after installation.

https://1drv.ms/f/s!Apiok8NRRsL6nLktKKlvfPuHvPYOxg

Does anybody recognize this piece?

The interior is out of the airplane right now and I need to know where this piece came from so I can find the part number to get a replacement.

Thanks,

Rick

frank.oconnor19 08-17-20 01:08 PM

Looks like the channel used to hold the ceiling sections. Is there velcro on the back of it? there are likely 8 pieces of these for each of the ceiling sections. Make sense?

Rick Erwin 08-17-20 01:12 PM

Thank you, Frank!

There is Velcro on the back and that does make sense.

Rick


All times are GMT -4. The time now is 03:00 AM.

Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.