337 Parts
 

I have several parts for a turbo/pressurized Skymaster.

1) Alternator (yellow tagged)

2) 2 windshields 1) unused, 1) used but in great condition

3) Turbocharger

4) Heater ignition unit (yellow tagged)

5) Landing gear actuator.

6) Some other gauges and engine parts

I have no idea how much each is worth, but would be willing to look at offers and e-mail photos and part numbers.

Thanks

I,m looking for a fuel gauge part # C669506-0207
Fred
Airplane 1973

fuel flow
 

I have a fuel flow gauge that came with my 73 P 337.

The part number is C662040-0103

Check with your parts guy, as I think multiple numbers are used for this gauge.

Let me know if I can help.

Thanks

Mike Demple

I need a tach. for my 1976 P337G . Do you have one?
Kevin

Are the windshields for Turbo or Pressurized?

Are the windshields for Turbo or Pressurized?

Both windshileds are for a pressurized 337.

Thanks

Mike D.

I need a tach. for my 1976 P337G . Do you have one?


I will check.

MD

Thanks

Do you still have the Turbo?

Is it new, or used?

It is a used turbo

See attached photo

Thanks

Mike D.

For some reason, I could only see about 1/2 of it.. (top half)

Looks rebuilt....?? or is it a takeoff??

Send me an email pschmitz@starband.net and let me know what you want for it, and any model numbers...

I'll verify it will fit mine..

Thanks!

Pat

Do you still have the turbo ....how much?

rwenner@charter.net

337 turbo
 

Please see attached photos.

The price is $500.00

Thanks

MD

Turbo
 

Do you have the part # and condition of the turbo?
How many hrs in service SOH, repair, or ?

rwenner@charter.net

Heater Parts?
 

I need the Heater Inlet Adapter Assy for the Janitrol combustion heater (PN 1550209-1). Do you happen to have one of those?

i am in need of a nose gear door(right side). if you can help me send me an e-mail (nicknazari@gmail.com) or call me at (909)772-6563.

thanks nick

Do you still have the fuel flow gauge? If so, is it in good condition, how much do you want for it, and can you E-mail pictures of the front and back. I assume it is in lbs/hr and has four ports on the back.
Thanks a lot!
George

Fuel Flow Gauge
 

I'll get a couple of pictures to you by tomorrow.

Thanks

Mike

Thanks Mike. Looking forward to the pictures.
George

Photo of fuel flow gauge.

Mike

Mike,
How much do you want for the gauge? I presume there are four ports on the back. Am ready to buy if the price is right, there are four ports on the back, and you assure that the gauge was working properly when you removed it. Please tell me how you would prefer that I pay for it.
Thanks.
George

P.S.
My E-mail is:

gfcudahy@msn.com

and telephone number(cell) is:

915 637 2884

Fuel Flow Gauge
 

Sorry about not sending a photo of the rear. I will do that. It does have 4 ports in the rear.

It should be worth $100.00 and was working when removed.

You can send a check for $100.00 plus $14.00 for shipping to the below address.

Mike Demple
10269 E. Desert Flower Place
Tucson, Arizona 85749

Of course, provide me with your shipping address

Thanks

Mike

Dual tone box
 

I am looking for a Dual Tone Box for a 1975 P337, dose anyone know the part number and dose anyone have the box ?
Fred

Mike,
I am sending a check of $120.00 in the mail tomorrow. Please insure the gauge - the extra is for any cost required for the insurance. If that is insufficient, please inform me and I will pay the difference.
My mailing address is:

George Cudahy
4 Cielo Lindo Drive
Anthony, NM 88021

Home telephone: 505 874 3606

Thanks,
George

Will do George

Mike

Mike,
Check is in the mail.
George

I have received your check and will mail the gauge today or no later than tomorrow.

Thanks

Mike

Mike,
Received the "Fuel Flow Gauge" last night. Looks like it is in very good condition.
Thanks.
George

Turbo charger
 

Is your turbo charger still for sale?

tg

This is from gfcudahy. I do not have a supercharger for sale. Mike at "Surveyflyer" is probably the person to contact on that item.
George

Windshield
 

What are the chances you still have a windshield? I have a 1973 T337G (pressurized).

Thanks,
Scott

Because of the extreme replacement process of the windshield, why would anyone install a used unit? These windscreens are expensive but relevant to the whole plane really not that expensive. My suggestion would be, if you need a windshield buy a new, modern tinted windscreen and enjoy the new unit while you can.

That makes sense, but one of the ones advertised was unused...I kind of took that as new(ish).