"the fabulous" ernie martin!!
 

any chance you would know what hoses are deleted with ray torres main gear door mod. i have e-mailed him without much luck (i'm sure he is very busy). i copied your list of hdy hoses but can not find out which hoses are not necessary. have any idea? if so i would appreciate the help.
thank ou rick bell

Dear Rick,

When reading your question, I thought it was referring to the "The Fabulous Ernie Martini", which sounded quite interesting, because Ernie seems to be more of a Cuba Libre drinker. However, maybe he does have THE KILLER martini recipe?

Good luck with the hoses quest.

Paul

Thanks for the "fabulous" part. I don't know, but I'll try to reach him to see if he knows.

Ernie

Rick:

I spoke to Ray Torres. He says that there are 4 hoses -- two on each side -- that are discarded with his kit. Open the big doors, look inside, and you'll find on each side a 4-way fitting where two of the fittings have been capped off. That's where the hoses used to go. With a figure from the Illustrated Parts Catalog (IPC)in your hand while looking up inside the doors you should be able to figure out the part number of the removed hoses. If you don't have an IPC, I can get the right figure out of mine and e-mail it to you, BUT I'm swamped right now and it might take me like a week.

Ray is willing to help further and has OK'd me giving you his cell phone, but it's hard to do this without the appropriate figure from the IPC. If you want to call him, send me an e-mail (look in my website listed at left for my address) and I'll send back his number.

Ernie

thank you ernie,

i can wait as this resteration is going a little slow. also i'm going to the states tomorrow and maybe i can locate something from the fbo. WHAT REALLY SUCKS IS I'M FORCED TO DRIVE!!!!!

Let me know.

Ernie

dumb ass
 

what a dumb ass i am. all i needed to do was to take all the orginal hoses off and send them in. needs to be done anyway to put the new ones on, sorry folks. should'nt have sobered up to make this thread