Many parts for sale
 

We have sold our last 4 Skymaster and have many parts for sale most of which were for T337H models but will fit others. I have a windshield, wing tips, fin tips nav light lenses, prop governors, turbochargers (not for a P). I have all the components to rebuild the alternator out circuit board. I have new ignition harnesses. I still have the core engine with 1551 hrs since factory rebuild, I have a rear engine mount, a rebuilt cowl flap motor.
I have too much to list so message me and I’ll see if I have it
Kim

Radome for P337H
 

Any idea where I can find a wing Radome for a 337?, Dan

This guy makes them, and very high quality from all reviews: https://www.facebook.com/groups/3601...00009984700003

Reach him via Facebook. He lives in Kiev.

Don't suppose you have the aft seat for a 75 G model

I actually have 7 rear seats for turbo H’s
I’ll look in the parts book to see if the are the same

I'd be interested too Kim. When I bought my P337H it had no rear seat. I'm referring to the 5th seat in the third row.

What I have might not work the turbo H models had 2 seat in the very back

You're right Kim. The the P models have two big valves in the middle of the rear firewall for pressurization purposes. The "P" 5th seat is narrower on the back than the bottom in order to accommodate these valves.

Did you find out if the seats would work for my 75 G model? If so, I'd be interested in getting one. Please let me know.

Thanks,

Tripp

My seats will fit s/n 33701816 and on I think earlier than that the seats bolted to the floor. The seats I have to go on rails
P/N ‘s 1514131-1 and -2

Bummer, my ship is 1670. I need the bolt to the floor model

By any chance would you have a certifiable altimeter compatible with a 69D?

I do not. I have 4 of the encoding altimeters but I think they were bad and we replaced them with standard altimeters and encoders

Front gear micro switch
 

Do you happen to have the microswitch for the front landing gear?

I'm looking for one.

Thanks,

Tripp

I do. I have both, the one on the actuator (square metal one) and the one on the uplock hook