Skymaster Forum

Skymaster Forum (http://www.337skymaster.com/messages/index.php)
-   Messages (http://www.337skymaster.com/messages/forumdisplay.php?f=1)
-   -   Check List for 73 P337 (http://www.337skymaster.com/messages/showthread.php?t=2383)

aldoradave 03-07-09 09:58 PM

Check List for 73 P337
 
I am posting a lot due to the fact I am getting pretty excited to get my P337 which is in escrow awaiting the annual/ pre buy, and I want to be well prepared to fly it away.

One thing that is very important to me is the check list and I have never found the ones in the book to be concise enough to use in real time. I like to customize my own, then laminate them in plastic for easy access.

I presume that many of you have done the same thing and I would very much appreciate it if you could share them with me. The best way would be by e mail to me: Dave@aldora.com. Or I guess you could attach them to this forum.

I anticipate being a very active member of this forum so thanks in advance.

Dave Dillehay

WebMaster 03-08-09 07:17 AM

Scott Smith, at www.skysmith.com sells checklist, already laminated, for not many dollars.

Ernie Martin 03-08-09 10:56 AM

I provide, free of charge, a customizable checklist in Microsoft Word format, which you then print on both sides of a page and laminate. It's at my "backup" Skymaster website www.SkymasterUS.com

Ernie

aldoradave 03-08-09 11:21 PM

Can't find the checklist
 
Dear Ernie,

Thanks for the link, it looks like a great site for me to bookmark. However, I was unable to find a checklist. The check list just mentions that you have a checklist available but not link or "click" to get to it. Maybe I missed something, if so please guide me to the right place.

Dave Dillehay

Ernie Martin 03-08-09 11:52 PM

Look at it again. It's two short paragraphs, and in the middle of the second one it tells you how to get it. The sentence starts "If you would like a copy of the document (it's in Microsoft Word 97 format), please send an e-mail to .....".

I'm going to be out of the country and essentially incommunicado most of this week, but I'll respond when I get back.

Ernie


All times are GMT -4. The time now is 07:47 PM.

Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.