Gear swing height
 

Hi im in the process of fabricating jacks to do gear swing but have not been able to find what hight i need to elevate to clear ground
I se that one manufacturer have a travel of 25 inches
I have some Hydraulik pistons with @ 18 inch travel i was hoping to use
Anyone have a minimum lift number
Best wishes from Denmark

I have a set of Alpha 868HLW the rams travel 25 inches according to their website. The website also shows 868 model number for 337, however I believe it’s Ram is about 18 inches.

Dan
N67S

In the Service Manual for my G model, it calls for thirty-three (33) inches of clearance between the belly and the hangar floor for a gear swing.

Rick

Perfect thanks
 

Well thats perfect
Thanks gentlemen