Heater help!
 

New owner new on forum . Bought 1967 T337. It had its heater removed from previous owner( failed decay test). I’ve had it overhauled and am now tryIng to reinstall. The ignition is not the same as original it is taller than old. It appears the blower bracket won’t fit now? Would appreciate a few pictures of heater and blower and anyone who might have experienced with this issue. Thanks!!!
.

Do you have the Service Manual?

Heater
 

Have Mx manual but no help it shows old ignition set up.

Contact the people who rebuilt
 

This may be an oversimplification of the matter; contact the rebuilder. I'm sure they have run into this issue before.

It was rebuilt by Haskins and has been very helpful. The old ignition units are no longer available. He had not come across the problem and did say the new ignition sits higher and may need to relocate the blower. I would like pictures of an installed unit if anyone could provide would be very grateful old or new.

I have a 1971 T337. I can send you some photos next time I am out at the field. Will be later this week. My heater was overhauled by the previous owner. The hobbs on it only shows 3 hours. The blower turns on but it does not fire.