When I replaced my gaskets at the fuel sensor port I replaced them with a rubber type gasket. I am pretty sure I sourced them from Yingling in Wichita. I don't know if they are any better than the cork style but time will tell. I didn't have any leaking at the time but I was inspecting all the tanks so they got changed at that time.
I had to have one tank welded at the outlet fitting. It was welded by a certified welder in Kalamazoo.
Photo shows the original cork gasket and the other photo is the tank back in place with the new rubber type gasket.
__________________
Herb R Harney
1968 337C
Flying the same Skymaster for 47 years
|