View Single Post
  #8  
Unread 02-25-17, 07:33 PM
DrDave DrDave is offline
Registered User
 
Join Date: Nov 2010
Location: Seattle
Posts: 115
DrDave is on a distinguished road
Detailing the paint is a major project. I just finished doing a plane. As with most, the paint had been neglected for years. My procedure was a series of steps:
1. wet sand 3000 Trizact;
2. wet sand 5000 Trizact;
3. cut with 3M Rubbing Compound A;
4. Polish with 3M Polishing Compound B;
5. Wax.

Takes a considerable amount of time but the results are gratifying. I used a combination of rotary, DA, RO, EG (elbow grease).

Dave
Reply With Quote