9/13/22 UPDATE:
So I test fitted the dome light before I start casting. The fitment was perfect. I have the silicone on hand, Im waiting for the UV resistant resin to come in. Keep in mind this is just a 3D test print using white PLA filament.
I will experiment the castings to have the same translucent opaque offwhite as the original.
Sorry for the missing panels...my plane is in the shop going through an avionics upgrade.
![Name: TestFit.gif
Views: 2216
Size: 373.5 KB](http://www.337skymaster.com/messages/attachment.php?attachmentid=2776&d=1663109308)