One more detail on side windows - offset liner
Great Lakes (and others?) sell the rubber liner that goes around inner window.
You want the slot in the liner to be slightly offset from center.
This keeps the two layers of plexi farther apart, so they won’t rub.
I also left a 1/2 inch (or was it an inch?) opening in liner at bottom
so the air between could vent.
When I did not do that, condensation would get trapped between the layers.
How’s THAT for obscure information!
__________________
David Wartofsky
Potomac Airfield
10300 Glen Way
Fort Washington, MD 20744
|