View Single Post
  #2  
Unread 07-26-23, 08:53 AM
Joes Joes is offline
Registered User
 
Join Date: Dec 2021
Location: Abingdon, VA
Posts: 80
Joes is on a distinguished road
I'm told the essentials are:
1. 1/4 in set of crow feet wrenches
2. 1/4 in wobble extensions
3. 1/4 in to 1/8 in strip of black tape wrapped clockwise on nuts so when the
tape is pulled the nut rotates onto the stud. Use screwdriver or finger with
grease to hold nut in place. (my favorite for any tough nut location,
especially the vacuum pumps).
Is the anymore tips or techniques for tough location anyone has used. Please elaborate if so, thanks Joe
Reply With Quote