Thread: JPI EDM 960 v edm 760 engine monitor
View Single Post
  #2  
Unread 08-03-17, 08:29 PM
Kim Geyer Kim Geyer is offline
Registered User
  
Join Date: May 2002
Location: Bahama, NC
Posts: 289
Kim Geyer is an unknown quantity at this point
I just installed a 930 in our 210. It's only has 2 tanks. The JPI connects to wire that powers the factory gauges. You leave the pennycap control monitors installed. I would think the switch that changes the gauge reading for main to aux would be disconnected because the 960 will show both main and aux tanks. But on the other hand I'm not sure when Cessna started using the pennycap system
Kim
Last edited by Kim Geyer : 08-03-17 at 08:52 PM.
Reply With Quote