[gkey]

I got some pics today from the shop, as they started with the dry fitting of avionics and instruments. The CAD program was a little optimistic with real estate on the panel, so they cut a plywood panel and did it the old way.

In this picture the ADF and attitude gyro were in the wrong positions - they should be positioned vice versa. Left of the Aspen comes the ASI, and to the right of the Aspen comes the ALT. They will be removed as soon as the Aspen MFD's become available, which will then be installed in their places.

For back-up instruments we will place 2" miniature ALT and ASI in the far left corner, one above the other. The big attitude indicator will remain. The syncophaser needle will be placed in its usual spot, in the left upper corner of the panel.