Jose
I agree with Bob once set up with corrections put into the unit should be very accurate other than it does not seem to read when engines idling below 1000rpm during taxi, my unit is repeatably accurate over many trips and it also helps me smooth out the engines during climb.
8000ft at 21" at 2350rpm
front 39 lphr
rear 41 lphr
9000ft at 20.5" at 2350rpm
front 38 lphr
rear 39 lphr
10000ft at 19.5" at 2350rpm
front 37 lphr
rear 38 lphr
Depends a bit on temp / density, as I said very reliable would not be without it
Regards ............. Wayne
|