|
CB panel wetness
Yes, of all placed to get wet...
Water getting past the windshield or even condensation inside can also run down the inner left edge and drool down there.
Every few years I go through the ritual of resealing the edge along the plexiglas.
1. Autozone painters tape right along the edge of the airframe
2. Another line of painters tape about 1/8th down the plexi
3. Smear some decent flexible outdoor sealant between the two lines of tape.
4. Wipe excess
5, Remove tape
6. Let dry
7. Go flying
8. Stay dry
__________________
David Wartofsky
Potomac Airfield
10300 Glen Way
Fort Washington, MD 20744
|