Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Unread 07-09-22, 12:18 PM
paul.j paul.j is offline
Registered User
 
Join Date: Apr 2019
Location: USA
Posts: 19
paul.j is on a distinguished road
Fuel Selector still draining in off position

Hello all,

In the process of doing the annual on my 77' G model and were replacing the o-rings in the rear fuel strainer. The fuel selectors has been in the off position for nearly 18 months. The front strainer work was done with no issues. When beginning to work on the rear the fuel was still draining, after about 5 mins about 1 gallon had come out.

I saw an old post that indicated that there could be a check valve that could keep the shut off from shutting off. Any insight would be appreciated.
Reply With Quote
  #2  
Unread 07-10-22, 07:22 PM
wslade2 wslade2 is offline
Registered User
 
Join Date: Feb 2016
Location: none
Posts: 303
wslade2 is on a distinguished road
I had the same issue but it was the fuel valve not providing a positive close off. Ultimately discovered deteriorated (as in gone) o-ring in the fuel valve.

I think the backflow not working is in the setting absolutely full tanks and dihedral causing the return port to be submerged. What is the fuel status in tank? If low and still leaking my guess would be the valve. So a test might be getting that fuel level down some below the return port and seeing if still leaking. I currently have my upper wing panel off fixing vent issue and installing CiES probes. I'm pretty sure return port is at top of tank.

However I am an E model and somewhat different from you, a G model with a unified system, with my valve that has to select between aux and main tanks. On the surface would anticipate return line in similar top position and valve construction similar but simplified for your model.

My check valve is located near the forward wing root under an access plate also with multiple electrical connectors.

I posted in another thread rebuild of fuel valve as no one rebuilds these for us.

Last edited by wslade2 : 07-10-22 at 07:25 PM.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 07:52 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.