Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Today's Posts

Reply
Thread Tools Rate Thread Display Modes
  #1  
Unread 10-31-06, 05:06 PM
big al 08 big al 08 is offline
Member
 
Join Date: Mar 2005
Location: beach in mx
Posts: 128
big al 08 is an unknown quantity at this point
"the fabulous" ernie martin!!

any chance you would know what hoses are deleted with ray torres main gear door mod. i have e-mailed him without much luck (i'm sure he is very busy). i copied your list of hdy hoses but can not find out which hoses are not necessary. have any idea? if so i would appreciate the help.
thank ou rick bell
Reply With Quote
  #2  
Unread 10-31-06, 07:59 PM
Paul462 Paul462 is offline
Registered User
 
Join Date: May 2003
Location: Florida
Posts: 137
Paul462 is an unknown quantity at this point
Question

Dear Rick,

When reading your question, I thought it was referring to the "The Fabulous Ernie Martini", which sounded quite interesting, because Ernie seems to be more of a Cuba Libre drinker. However, maybe he does have THE KILLER martini recipe?

Good luck with the hoses quest.

Paul
__________________
Paul
T337C
Reply With Quote
  #3  
Unread 11-01-06, 02:39 PM
Ernie Martin's Avatar
Ernie Martin Ernie Martin is offline
Administrator
 
Join Date: Apr 2002
Location: Miami, Florida
Posts: 989
Ernie Martin is an unknown quantity at this point
Thanks for the "fabulous" part. I don't know, but I'll try to reach him to see if he knows.

Ernie
Reply With Quote
  #4  
Unread 11-02-06, 12:05 PM
Ernie Martin's Avatar
Ernie Martin Ernie Martin is offline
Administrator
 
Join Date: Apr 2002
Location: Miami, Florida
Posts: 989
Ernie Martin is an unknown quantity at this point
Rick:

I spoke to Ray Torres. He says that there are 4 hoses -- two on each side -- that are discarded with his kit. Open the big doors, look inside, and you'll find on each side a 4-way fitting where two of the fittings have been capped off. That's where the hoses used to go. With a figure from the Illustrated Parts Catalog (IPC)in your hand while looking up inside the doors you should be able to figure out the part number of the removed hoses. If you don't have an IPC, I can get the right figure out of mine and e-mail it to you, BUT I'm swamped right now and it might take me like a week.

Ray is willing to help further and has OK'd me giving you his cell phone, but it's hard to do this without the appropriate figure from the IPC. If you want to call him, send me an e-mail (look in my website listed at left for my address) and I'll send back his number.

Ernie
Reply With Quote
  #5  
Unread 11-02-06, 02:04 PM
big al 08 big al 08 is offline
Member
 
Join Date: Mar 2005
Location: beach in mx
Posts: 128
big al 08 is an unknown quantity at this point
thank you ernie,

i can wait as this resteration is going a little slow. also i'm going to the states tomorrow and maybe i can locate something from the fbo. WHAT REALLY SUCKS IS I'M FORCED TO DRIVE!!!!!
Reply With Quote
  #6  
Unread 11-02-06, 03:45 PM
Ernie Martin's Avatar
Ernie Martin Ernie Martin is offline
Administrator
 
Join Date: Apr 2002
Location: Miami, Florida
Posts: 989
Ernie Martin is an unknown quantity at this point
Let me know.

Ernie
Reply With Quote
  #7  
Unread 11-07-06, 07:30 PM
big al 08 big al 08 is offline
Member
 
Join Date: Mar 2005
Location: beach in mx
Posts: 128
big al 08 is an unknown quantity at this point
Thumbs down dumb ass

what a dumb ass i am. all i needed to do was to take all the orginal hoses off and send them in. needs to be done anyway to put the new ones on, sorry folks. should'nt have sobered up to make this thread
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 08:30 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.