![]() |
|
Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
Circuit board cover
Does the circuit/diode alternator fuse board (located between the two voltage regulators on the front firewall) have a cover? 337G model. Looking at Figure 15-6 in the parts catalogue doesn't give an clue.
If one is supposed to be there, we're looking for one! Thanks! |
#2
|
|||
|
|||
No there is not a cover. There is a little rubber cover that goes on the terminal stip on each side of the board.
Last edited by Kim Geyer : 10-22-15 at 09:23 PM. |
![]() |
Thread Tools | |
Display Modes | Rate This Thread |
|
|