|
Register | FAQ | Members List | Calendar | Today's Posts | Search |
Thread Tools | Rate Thread | Display Modes |
#1
|
|||
|
|||
JPI 960 engine monitor for P337G
Anyone installed the 960 in a P model? I'm finding the installation on the front engine is a real problem in keeping to a constant distance from the cylinder of 2 to 4 inches especially on the front engine right side. No. 5 exhaust is very short and the pipe clamps on the other two are right in the way. Wondering if anyone came up with a good fix. JPI has been no help with this. Thanks in advance.
|