Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Today's Posts

Reply
Thread Tools Rate Thread Display Modes
  #1  
Unread 02-26-07, 01:17 PM
Ed Coffman Ed Coffman is offline
Registered User
 
Join Date: Apr 2002
Location: Pittsboro, NC
Posts: 109
Ed Coffman is an unknown quantity at this point
Pressurized Mags

Hi All,

Does anyone have pressurized mags on their bird? If so I would like to find out some stuff.

Thanks,

Ed Coffman
________

Last edited by Ed Coffman : 06-18-15 at 11:58 AM.
Reply With Quote
  #2  
Unread 02-26-07, 01:55 PM
skymstr02's Avatar
skymstr02 skymstr02 is offline
Ace of the Atmosphere
 
Join Date: Apr 2002
Location: Madison, MS
Posts: 329
skymstr02 is an unknown quantity at this point
I installed the pressurization kit from TCM on Piper Turbo Arrows and Seneca's. A real tidy and simple task.

Tapped into the upper deck with a 1/4 line, thru an inline air filter, a "T" fitting, then to the two mags. The line went into the tapped hole on the magneto at the distributor gear.
Reply With Quote
  #3  
Unread 02-26-07, 04:23 PM
Jerry De Santis's Avatar
Jerry De Santis Jerry De Santis is offline
TAS (Thin Air Seeker)
 
Join Date: Apr 2002
Location: Battle Creek, Mi
Posts: 457
Jerry De Santis is on a distinguished road
Press Mags

Yep, I do! It is N34EC. What info do you need?

Jerry
Reply With Quote
  #4  
Unread 02-26-07, 05:07 PM
Ed Coffman Ed Coffman is offline
Registered User
 
Join Date: Apr 2002
Location: Pittsboro, NC
Posts: 109
Ed Coffman is an unknown quantity at this point
Hi Jerry,

I assume you have a P337 and are using the Riley STC. My question is: what is the mag part number you are using and is the tach drive still run off the mag? I have a T337H and am investigating the possibility of pressurizing the magnetoes.

Thanks,

Ed Coffman
________

Last edited by Ed Coffman : 06-18-15 at 11:59 AM.
Reply With Quote
  #5  
Unread 02-26-07, 06:10 PM
Jerry De Santis's Avatar
Jerry De Santis Jerry De Santis is offline
TAS (Thin Air Seeker)
 
Join Date: Apr 2002
Location: Battle Creek, Mi
Posts: 457
Jerry De Santis is on a distinguished road
mags

I'l get the mag number for you next time I go to the hangar. I can tell you now, the tack drive is driven off the mag.

Jerry
Reply With Quote
  #6  
Unread 02-27-07, 08:24 AM
skymstr02's Avatar
skymstr02 skymstr02 is offline
Ace of the Atmosphere
 
Join Date: Apr 2002
Location: Madison, MS
Posts: 329
skymstr02 is an unknown quantity at this point
But the tach sensor is on the bottom hole, the one closest to the rotating magnet. The pressurization air goes into the other hole, the upper one.
Reply With Quote
  #7  
Unread 02-27-07, 09:16 AM
Jerry De Santis's Avatar
Jerry De Santis Jerry De Santis is offline
TAS (Thin Air Seeker)
 
Join Date: Apr 2002
Location: Battle Creek, Mi
Posts: 457
Jerry De Santis is on a distinguished road
mags

When I go to the habgar this week I will look at and and let you know>

Jerry
Reply With Quote
  #8  
Unread 02-27-07, 11:30 AM
djarrett djarrett is offline
Registered User
 
Join Date: Feb 2004
Location: kbzn
Posts: 28
djarrett is an unknown quantity at this point
Pressure Mags

Don't forget to plug the little hole in the bottom or everything is for not. I learned the hard way and couldn't figure out why no pressure mag. Works great with a little screw in the hole.

DJarrett
Reply With Quote
  #9  
Unread 06-15-15, 04:23 PM
JamesC JamesC is offline
Registered User
 
Join Date: Sep 2013
Location: Canada
Posts: 102
JamesC is on a distinguished road
Does anyone have the part number for the in-line filter made by Continental?
I need two of them as my mechanic noticed they were absent. I read on another thread something about upper deck air being clean, but the problem is any oil that may eventually leak from a turbo could get into the mags.
Thanks!!
Reply With Quote
  #10  
Unread 06-18-15, 04:15 PM
Kim Geyer Kim Geyer is offline
Registered User
 
Join Date: May 2002
Location: Bahama, NC
Posts: 294
Kim Geyer is an unknown quantity at this point
Quote:
Originally Posted by JamesC View Post
Does anyone have the part number for the in-line filter made by Continental?
I need two of them as my mechanic noticed they were absent. I read on another thread something about upper deck air being clean, but the problem is any oil that may eventually leak from a turbo could get into the mags.
Thanks!!
The P/N is 653386
Kim
Reply With Quote
  #11  
Unread 06-19-15, 05:52 PM
JamesC JamesC is offline
Registered User
 
Join Date: Sep 2013
Location: Canada
Posts: 102
JamesC is on a distinguished road
Thanks guys - RAM looks less expensive - will likely go with them. Both have improved models with a drainage port for water etc.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 06:55 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.