|
Register | FAQ | Members List | Calendar | Today's Posts | Search |
Thread Tools | Rate Thread | Display Modes |
#1
|
|||
|
|||
Dimensions for weighing
I'm preparing to weigh my Reims FT337GP (same as a T337G) and I cannot find the dimensions from the datum to:
The center of the axles for the nose gear; and, The center of the axles for the main gears. Does anyone out there have them readily available, or can someone direct me to a place to find them? Thanks, Rick
__________________
N337K-FT337GP KLOU |
#2
|
|||
|
|||
with the nose strut extended @3 ins. I use 59.0, and the mains are 152.6
Kim |
#3
|
|||
|
|||
Thank you, Kim!
__________________
N337K-FT337GP KLOU |