Nosegear Warning Plate

[OhioSkymaster]

I have seen a red warning label on the nosegear of a few other Skymasters but mine doesn't have one and there is no information on it in the manuals that I can find. Can anyone tell me what it says? I should have written it down when I saw it, but did not.

[Learjetter]

You can find a list of the required placards in the A6CE type certificate.

You can have new stickers made by a local print shop.

Attached is a photo of the placard in my ‘77 G model gear (one on underside of each nose gear door and 1 on inside of each main gear spring door).

[MD83driver]

Would this be the one your are thinking of. Off of my P337H. Before restoring it.

[Rick Erwin]

OhioSkymaster, if you're looking for the placard about the hydraulic pump circuit breaker, I had some made for my plane, along with a slew of other placards also.

The guy that made them would still have the template and can make more of them if that's what you're after. He's available at dean@pipts.com.

MD83Driver, I don't recall seeing that placard. I remember reading about it though. Where does it go?

Rick

[MD83driver]

Rick, The placard is shown in fig.2 Item 37. It is not shown in the parts catalog of the nose strut. Here are pictures of the installed placard as it was on my plane. These are the only pictures I have. Ray

[Rick Erwin]

Thanks Ray. Figure 2 is where I must have seen the placard.

I'll have to check whether it's there tomorrow. I'm thinking it's not...

Rick

[Rick Erwin]

It's there! I'd never noticed it. Something else to restore.

Thanks again, Ray