|
|
|||||||
| Register | FAQ | Members List | Calendar | Today's Posts | Search |
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Aft cowl breather outlet
Hi All,
Any ideas as to where can I get the small tubing that is in the upper rear cowl that the rear engine breather piping exhausts thru? The aircraft is a 1977 337 G. The part #1250101-6. Has anyone dealt with this in another way? Thanks, Guy, the old 72 driver.... 
|
|
#2
10-25-11, 08:42 AM
|
||||
|
||||
|
Hi, isn't it just stock hose. I know there is a metal end that comes out the back through a large grommet.
__________________
Gord C-FTES
|
|
#3
10-25-11, 11:27 AM
|
||||
|
||||
|
Aft cowl breather outlet
I believe it's a small piece of metal tubing that is flared on the end that protrudes thru the aft cowl just above the prop hub. Hose would connect to the end that's inside the cowl.
Thanks, Guy....
|
|
#4
10-25-11, 08:11 PM
|
||||
|
||||
|
Search shows one here
__________________
Herb R Harney 1968 337C Flying the same Skymaster for 47 years
|
Hybrid Mode
