Skymaster Forum  

Go Back   Skymaster Forum > Parts Sources
Register FAQ Members List Calendar Today's Posts

Reply
Thread Tools Rate Thread Display Modes
  #1  
Unread 06-22-11, 01:57 PM
mhudsonbsme mhudsonbsme is offline
Registered User
 
Join Date: May 2011
Location: Nashville, NC
Posts: 103
mhudsonbsme is on a distinguished road
Fuel Hose Source

Any recommendations on suppliers for fuel hoses for the rear and front engines? I have a couple of chafed fuel lines that I feel should be replaced. Wondering where to buy, cost vs. quality, with or without integral fire sleeve, etc.
Reply With Quote
  #2  
Unread 11-02-13, 06:30 PM
sdellinger sdellinger is offline
Registered User
 
Join Date: Jan 2010
Location: Texas
Posts: 2
sdellinger is on a distinguished road
When to replace engine compartment hoses?

Where can I find info on when all flexible hoses in the engine compartments MUST be replaced. All I can find are recommendations on when to replace those hoses, but I can't find anything directive.
Thanks!
Reply With Quote
  #3  
Unread 11-03-13, 08:03 PM
hharney's Avatar
hharney hharney is offline
Forum Administrator
 
Join Date: Jul 2002
Location: Michigan (8D4)
Posts: 2,261
hharney is on a distinguished road
There are some AD's for aircraft but I am not aware of any for the Skymaster. Typically the service manual suggests when engine is overhauled the hoses should be changed. Check the service manual.

Hoses are available with or without fire sleeve. Your mechanic should have sources and can buy the fire sleeve bulk to install on the hoses purchased.
__________________
Herb R Harney
1968 337C

Flying the same Skymaster for 47 years
Reply With Quote
  #4  
Unread 11-22-13, 01:26 PM
rmorris rmorris is offline
Registered User
 
Join Date: Nov 2007
Location: NN
Posts: 267
rmorris is an unknown quantity at this point
hoses

I use Precision Hose Technologies (PHT), and have been very happy with them. I have also been happy with my Aviall hoses - both good sources.

For PHT, I just send them (with the a&p's help) hose length, and connection fitting sizes on both ends - they fan firesleeve, or not, as you desire. I firesleeve most of mine.

I have used PHT for all engine hoses, and in both compartments, as well as hydrualic system hoses.

Good luck,
Robert
Reply With Quote
  #5  
Unread 11-25-13, 12:12 AM
GEE-BEE GEE-BEE is offline
Registered User
 
Join Date: Nov 2013
Location: RANCHO MIRAGE CA
Posts: 2
GEE-BEE is on a distinguished road
Wink Teflon hoses

I can do your teflon hoses in various colors

all with tso and certs

Colors:
Marron
Brown
Med Blue

all with s/s fittings

I will be doing a black firesleeve next ( slip ) on type with teflon hoses underneth for a stc holder that requires black hoses with hose black baffles and seals

P.S. I also ave all the original patterns for the 336-337-P337 and Riley Rocket 337 baffle seals.

baffle seal colors :
Champion red ( Riley)
Med Blue
Black
Dark Blue
Scat orange

regards Guy Ginbey

Gee-Bee
n77gb@msn.com
Attached Thumbnails
Click image for larger version

Name:	2012-11-15_16-06-23_70.jpg
Views:	2361
Size:	64.1 KB
ID:	1506   Click image for larger version

Name:	late gear v35 002.jpg
Views:	2385
Size:	321.3 KB
ID:	1507   Click image for larger version

Name:	Engine in the Bonanza 7-26-2012 001.jpg
Views:	2325
Size:	13.7 KB
ID:	1508  
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 01:59 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.