|
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
|
Thread Tools | Rate Thread | Display Modes |
|
#4
11-29-08, 11:54 AM
|
||||
|
||||
|
We have the '68 T337C as well and have the same problem. We tried a larger nozzle (12B as opposed to 12A on the rest) and it helped a little. We are in the middle of ordering GAMI jectors because the front temps are all over the place and hope this also alleviated this problem as well.
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode