|
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
|
Thread Tools | Rate Thread | Display Modes |
|
#3
06-01-12, 11:20 AM
|
|||
|
|||
|
Typically, the only thing that you change on these are #3, 4, 12 (from your diagram)at a cost of around 10 dollars. The rest of the parts are usually fine. You also need to get new retaining pins that are not shown in your diagram.
Last edited by Tony : 06-01-12 at 11:24 AM. 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode