|
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
|
Thread Tools | Rate Thread | Display Modes |
|
#5
07-30-20, 06:39 PM
|
||||
|
||||
|
Drill motor to cycle the gear if you have the early model with engine driven pump. Jack points, 3/8 and 7/16 crows foot wrench for 1/4 ratchet to remove the hydraulic pump and alternators, very handy.
__________________
Herb R Harney 1968 337C Flying the same Skymaster for 47 years 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode