|
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
|
Thread Tools | Rate Thread | Display Modes |
|
#3
08-21-22, 06:54 PM
|
||||
|
||||
|
I think Kim is right. When you do a run-up check at 1700-2000 rpm, all you're doing is making sure the props will feather.
Do your governor check again at full take off power (on one engine at a time) and see if the results aren't different. 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode