|
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
|
Thread Tools | Rate Thread | Display Modes |
|
#7
04-04-23, 05:37 PM
|
||||
|
||||
|
Will take another hard look.
The master cylinders and calipers were overhauled, also the long actuator rods under brake pedals were bent. The A&P "straightened" them, but impossible to be accurate unless turned on a lathe. Same issue still. Appreciate all the insight. 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode