|
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
|
Thread Tools | Rate Thread | Display Modes |
|
#9
05-25-23, 09:21 AM
|
|||
|
|||
|
I get it, the trailing of the water concept was from a conversation with Uavionix tech support. My personal concept on this was to use the tubing with a tee at midway length and silicone applied where the wires come in to the tube. Place a tube on the tee with a down turn at the top. Hope this helps, wasn't happy to have to replace after 2 years. Joe
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode