|
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
|
Thread Tools | Rate Thread | Display Modes |
|
#2
11-05-23, 03:05 PM
|
||||
|
||||
|
Kevin,
On my 77 NA 337, I had a shadin sensor plumbed in between the throttle body and flow divider (spider). So I just spliced the new red cube for the GI275 EIS in the same spot, immediately above #1 cylinder, held in place with adel clamps. Positioning & plumbing is the same on both engines. I put the fuel pressure sender on the flow divider. Might need a snubber for fuel pressure if your new gauges are as sensitive as mine are. PM for more details or you want to chat. -LJ 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode