Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Today's Posts

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Unread 03-18-07, 10:21 PM
gfcudahy gfcudahy is offline
Registered User
 
Join Date: Nov 2005
Location: NM
Posts: 29
gfcudahy is an unknown quantity at this point
Electroluminescent panel lights

Does anyone know how the Electroluminescent lights work? My power supply puts out the variable AC volts up to about 115 volts with the panels disconnected or with only the flap panel connected(it works). The problem is the switch panel light on the pilot side. Before powering up the pilot side light (and disconnected from the power supply) it has a resistance of approx. 100-140k ohms. When connected by itself the power supply will only put out about 10-15 volts at max. Immediately after disconnecting the switch panel and checking the resistance again I get about 50 ohms. Is there a way to fix the panel or remove its connection at the panel or???????
Thanks.
George
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 07:12 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.