Interior Trim Prices

[Roger]

I am replacing some of the plastic in my 337H and thought members might be interested in the price differences out there.

From Neisner: Roger, I have the lower door plastic and the door window plastic, see
photos attached for $95 each. I do not have the other pieces but I think
Cessna or Plane Plastics has them.
Don Nieser
Commodore Aerospace Corp
405-722-4079
*************************************************
From Owen Bell:4 Sept 06

Thank you for your inquiry about parts for your 1980 337H

K1515044-4 RH AFT Door MLD Lower (lower trim) = $250
K1515044-1 LH FWD Door MLD Lower (lower trim) = $250
K1515063-1 Panel Window Trim (trim for around clam shell door window = $700
K1511420-35 Lower door assembly I don't find this number in my parts book

Trim Panel Assembly-lower door

1515036-22

$650


Let me know about the K1511420-35 Lower door assembly if you need the entire lower door or just the trim for it.

Owen Bell
************************************************** *

My email back to Owen Bell:Owen

I guess I don't really understand the pricing issue here.

For example you have interior trim piece : K1515063-1 (Panel window trim) for $700- ?
This being the same piece that Vantage sell for $91.69?

Is there something here I am missing? I was just trying to throw some business towards a small company that is involved with skymasters.

advise/tks/Roger

**************************************************
Owem Bells email back to me:Roger

I am not familiar with Vantage

If they have a good fiberglass piece for $91.00 then that is a very good
price.

Buy it and see if it fits right.

Please let me know how it works out.

Owen Bell


*************************************************

I believe that Owens trim parts are a nice light weight fiberglass, but Niesners said his parts are heavy duty (they are from the Riley Rocket stock) You also have to trim the piece from Niesner.

However I am pretty shocked by what amounts to in some cases a 10 time higher price by Owen Bell's company.

I actually thought Owen Bell had put the decimal point in the wrong place.

Not bashing anybody, just using the web board for its intended. purpose.

Roger