Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #6  
Unread 05-26-07, 10:11 AM
Dave Underwood Dave Underwood is offline
N456TL
 
Join Date: May 2002
Location: England
Posts: 167
Dave Underwood is on a distinguished road
As a further note, I think there will always be some flow out the P2 vent as the bleed off the turbo is going to be pretty constant and has to go somewhere.

Based on another look at the diagram, it would look like you can only control the front bleed air by having it go through the heat exchanger for cooling or bypassing the heat exchanger giving you warm air or hot air flow if the gas heater is fired up.

Regards - Dave
Reply With Quote
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 08:38 AM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.