![]() |
|
Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Rate Thread | Display Modes |
#7
|
||||
|
||||
I have to agree with Mark, the hours seem to be in line, considering the scope of the work accomplished. The number 3 cylinder is in the center, so all of the intercylinder baffling on that side must be removed to gain access to the cylinder. It does take some time to remove the exhaust clamps if the bolts are rusted, in order to prevent damage to the clamps themselves.
|
Thread Tools | |
Display Modes | Rate This Thread |
|
|