FS: Autopilot for 337

[mhudsonbsme]

Make an offer! Let me know what parts you need and name your price. I can post pictures and part numbers

Don't have a good set of rear or front engine baffles?

Thanks!

Mike

[n86121]

Not to lowball, but ine works. That said, having spare ailteroon elevator servos, DG, control head, main processor, etc probably not a bad idea.

$500 for the whole thing, plus shipping?


D

[mhudsonbsme]

Sounds good. I will get pictures and all of the part numbers today. If you could, please PM me your email address and I will send them to you.

Thanks!

Mike

[mhudsonbsme]

Hi David,

Sorry it has taken me a little bit to get back to you. It has been too hot for me to work in my hangar to pull the components until last night!

Here is what I pulled so far. If you could, let me know if I am missing anything. Also, do you know where the servos are located for this autopilot system?



Transmitter - RTA-476A
Computer Amplifier - CA 520B
Receiver - R402A
Control Unit - C-420 A

Thanks!

Mike

[n86121]

The aileron servo is in a panel on the passenger side wing. I think the panel was about 2/3rds of the way out.

The elevator servo is behind the long panel on the pilot site boom. Its held in by 4 screws accessible on the outside of the boom.

Do you remember if it was it all working when it came out?

D

[mhudsonbsme]

Hi David,

I didn't realize it but one of the mechanics that helps me with my aircraft had already pulled the servos for his airplane. I had completely forgot until he met me out there and asked what I was looking for!

Anyhow, if you are still interested in the remaining items, I would drop the price to $300.

Thanks!

Mike

[n86121]

Do you still have the navomatic brains?

D