|
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools |
Rating: 
|
Display Modes |
|
|
|
#1
|
|||
|
|||
|
Information on Clamshell Door
Hi Robert,
Just curious, where are you located in NC? I am based out of Halifax, KIXA. As far as the O2A door, It simply bolted on. I used the hinges off of the regular door. I was allowed to install it by having the mechanic reference the 02A service and parts manual - basically having them write in the log books installed per 02A service manual. If you are interested in the clamshell door, I will sell it for $200. Thanks! Mike 
|
|
#2
08-03-11, 09:22 PM
|
|||
|
|||
|
Both Windows
I don't have the lower rear window in front of the door. You can install it by using the O2A parts, and again have it signed off by your mechanic as installed per O2A service manual. However, this would require removing the front panels, installing the proper ribs/bulkheads, and then putting in the windows.
As far as purchasing an O2A door, I found a O2A being parted, and bought it for $400. However, you can call Don Meisser at Commodore Aerospace. I am sure he either has one or can locate one for you. Thanks! Mike
|
|
#3
09-12-11, 03:47 PM
|
|||
|
|||
|
door install
Mike,
I am located in Charlotte. I got an O2 door from Don Neiser that should suite my needs. Can you email me the contact info and home airport of your mechanic? I would like to look at flying my plane over to have the door swapped out, and maybe we could grab lunch and talk Skymasters or somethin. -Robert rmorris@agsi.us
|
|
#4
04-08-12, 10:37 AM
|
|||
|
|||
|
2-piece step door-$100 obo!
I have a 2 piece door off of a 337 G. $100 or best offer! It's spring and time to clean the hangar!
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
