visors

[loy53]

looking for a set of rosen visors for my 65 skymaster.
thanks,
Howard

[hharney]

Just a word about the Rosen's; what a poor mounting system and very little help from the company. BTW, I spent about 10 hours installing mine. I threw away the instructions and feel like I got a much better installation. The time consumer is bending and shaping their make shift backer plates. Absolutely ridiculous design. Mickey to the full extent.

I have photos if you step down to their product

Originally Posted by hharney

Just a word about the Rosen's; what a poor mounting system and very little help from the company. BTW, I spent about 10 hours installing mine. I threw away the instructions and feel like I got a much better installation. The time consumer is bending and shaping their make shift backer plates. Absolutely ridiculous design. Mickey to the full extent.

I have photos if you step down to their product

That good to know about the rosen visors. I was thinking about installing a set in mine. There was a post about someone replacing the existing visor with a visor similar to the rosen, but using the existing mount. I've tried searching but am having trouble finding it. If I do I'll post a link.

[hharney]

I looked at those before I bought the Rosen system. Maybe I should have gone that route.

Now that I have the Rosen's I love em but they were just a pain to install.

Try this

http://www.planeplastics.com/accesso...-cessna-visors

Use these with your existing mounting

Thanks for the link.

[rick bell]

Originally Posted by Tony

Thanks for the link.

i love mine, a little funky to install (it took me abut four hours) and never have had
any maintenance problems with them.

[kilr4d]

Originally Posted by hharney

I looked at those before I bought the Rosen system. Maybe I should have gone that route.

Now that I have the Rosen's I love em but they were just a pain to install.

Try this

http://www.planeplastics.com/accesso...-cessna-visors

Use these with your existing mounting

Bumping old threads today...

Here's an (awful) pic of my OEM sunvisors. They're center mount and shaped like the Pressurized pics on Plane Plastics website. But mine is naturally aspirated.

So should I get the ARCF visor that doesn't look like mine but it's the right application or the ARCF that looks like mine but it's the wrong application?

Thanks,

John

[Kim Geyer]

The plane plastics visors replace the cessna visors on the older models up to @ 1972
I had to install the Rosen visors on our T337H