Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Unread 11-02-16, 10:11 AM
rmorris rmorris is offline
Registered User
 
Join Date: Nov 2007
Location: NN
Posts: 269
rmorris is an unknown quantity at this point
good replies

Herb- yep, just thought there might be some folks who had not read it...I was focused on the engine conversion portion, but overall it is a great write-up on Skymasters in general
When you bought your remfg TSIO-360 engine from TCM, what did it come with (ie what did you pull from your old engine and have to get overhauled, so all was as new)? eg. fuel system, turbo, mags, oil filter, etc?

both - good replies, thanks for sharing your thoughts.
Reply With Quote
  #2  
Unread 11-04-16, 08:45 AM
hharney's Avatar
hharney hharney is offline
Forum Administrator
 
Join Date: Jul 2002
Location: Michigan (8D4)
Posts: 2,266
hharney is on a distinguished road
Let me see if I can get this right by memory.......I had the hydraulic pump overhauled and the governor, had to use my vac pump, exhaust, air filter, scat tubes, hmmmm I'm thinking that there is something else maybe but the remans come with just about everything installed and ready to go. I have about 150 hours on it now since June last year and it's doing great. I did have some oil seep from the exhaust rocker covers and Continental sent me some new ones. Just put them on so I will see if that's resolved but that's it so far.

I can quote some numbers or just call Continental they are really good to talk to
__________________
Herb R Harney
1968 337C

Flying the same Skymaster for 47 years
Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 12:26 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.