|
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
|
Thread Tools | Rate Thread | Display Modes |
|
#11
04-03-18, 04:50 PM
|
||||
|
||||
|
STC needed
You may not need an STC, just a field approval. If you can install all the associated door parts for the O2-A as shown in the parts manual, the logic flows that the Cessna engineering data is inherent in the installation. All the other required information for the field approval is in the military info. eg instructions for continued airworthiness, etc.
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode