![]() |
|
Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
Navomatic 400 install manual??
Hello ALL. My '65 C337 came with a Navomatic 400 autopilot but it was removed before I purchased the airplane. All the parts are in a box. Actually I have two complete systems. I'm looking for the installation manual so I can re-install it and check out the autopilot. I can figure out everything except for connecting the control cable to the aileron bell crank and the chain to the survo. I'm only interested in installing the heading (roll) axis. Any help would be appreciated!
Regards, BILLS Last edited by cessnadriver : 11-07-19 at 08:59 PM. Reason: forgot something |
#2
|
||||
|
||||
__________________
Herb R Harney 1968 337C Flying the same Skymaster for 47 years Last edited by hharney : 11-07-19 at 09:38 PM. |
#3
|
|||
|
|||
this is fantastic. I was recently looking for this myself.
I already know my control head needs service as the heading knob does not turn. Any suggestions on who I could send the box too? |
#4
|
||||
|
||||
I just purchased my 337, but the previous owner had been taking the airplane to AutoPilot Central on an annual basis to have it run through. I really appreciate that he did this as it is as good as new. I plan to maintain his schedule, Tulsa is a nice place to visit on an overnight. They might do mail-in work.
http://www.autopilotcentral.com/index.php/service/ |
#5
|
|||
|
|||
I don’t have an owners/operating manual for the 400 navomatic and having hard time finding one. Any suggestions
|
#6
|
||||
|
||||
__________________
Herb R Harney 1968 337C Flying the same Skymaster for 47 years |
![]() |
Thread Tools | |
Display Modes | Rate This Thread |
|
|