![]() |
|
Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
Hi Tripp
I did the same, ordered off the parts manual but also included a number of spares which I ended up using as many were just to difficult to lock. Also found the same with the avionics panel, ended up using two sizes. Dave
__________________
Dave S 1974G VH-DCS |
#2
|
||||
|
||||
New cowl fasteners
Trippster.
FYI the length is equal to .030" per dash number, I'm not sure of the millimeter conversion but I too had the same problem. I'm thinking it was the corners of the cowl and or access panel that required a longer camloc? Regards. BILLS |
#3
|
|||
|
|||
Thanks,
The new longer fasteners arrived today, so tomorrow we will see if they do the job. Tripp |
![]() |
Thread Tools | |
Display Modes | Rate This Thread |
|
|