73G Panel Modification

[california Sky]

Redoing our panel in 58C.

Looking to get as much input from others experiences as possible.

After about 5 tries we are almost there with the adjustments needed to get it just right.

Going with EI instruments as a primary replacement on the pilot side.

Will post pics in the morning

[hayesjaj]

Originally Posted by california Sky

Redoing our panel in 58C.

Looking to get as much input from others experiences as possible.

After about 5 tries we are almost there with the adjustments needed to get it just right.

Going with EI instruments as a primary replacement on the pilot side.

Will post pics in the morning

Are you doing the CGR-30P? If so, we should talk (and I would love to fly up from San Diego and see the project!). In addition to my 337 project, my brother/parents have a 337D and want to put a CGR-30P combo into it. Unfortunately, EI hasn't done an STC for us. Are you using a DER? Any chance you could share his info with me? I think I prefer the round gauges over the square (and significant panel mods required) for the mvp-50p.

[california Sky]

Did quite a bit of research and the EI product is well respected.

We are based at the old Norton air base would love to show you what we have done so far.

Still trying to upload pics maybe I can post a link to google drive of our progress.

Last iteration of the panel cut should be done next couple days.

Went with dual Aspens, kept the 400 autopilot which was sent out to Bevan for inspection / 8130.

Our plan is to have the 3 displays from EI on the pilot side where nav indicators used to live.

Feel free to contact us.

213-308-7077

Will keep updates going here for others to read.

Thanks