|
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Sealing fuel transducer plates
Here is how I have sealed mine. New viton gasket underneath the plate, I used a piloted 3/16 60 degree countersink on the 6 holes, and used a viton oring on the bolt under the thin washer to eliminate leaks caused by the thin cork gasket under the washer.
Dan Last edited by Dan schultz : 01-19-21 at 05:58 PM. 
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
