|
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
|
Thread Tools | Rate Thread | Display Modes |
|
#2
10-19-22, 08:22 PM
|
|||
|
|||
|
Ended up being the small oring on the treaded post with the lock washer and nut. Unfortunately I did not replace it when I replaced the piston seal and expander. Not too big of a job though, easy to disconnect the actuator from the waste gate.
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode